8 Ikegami HDK-77EC Camera Chain Package- USED

Description

Full Digital and High Picture Quality
The HDK-77EC2 supports native 1080i/59.94 Hz and 720p/59.94Hz dual format with CMOS sensors and adopts TA-79HD HD-Triax Adaptor to utilize existing triax infrastructure. The harmony of advanced technology and legacy of transmission system offers a practical solution. Advanced CMOS sensors are employed to achieve superb picture quality. CMOS sensors have wide dynamic range and in principle, no smear since electric charges are not shifted throughout the imager which is the cause of vertical smear in CCDs. Instead each pixel of the CMOS sensor has it’s own amplifier (which changes electric charges to voltage signals). So it performs signal amplification on a pixel basis.

• Employs new technology
  2/3-inch specified CMOS sensors Native 720/60p and 1080/60i operation available. HDK-77EC2 type: Sensitivity F10(1080i/59.94 mode), F11(1080/50 mode)/2000 lx (Typical)
• CCU-890T Full digital processing HDTV-Triax Camera Control Unit
  The CCU-890T is designed for dedicated use of a triax connection between the HDK-77EC2 camera with TA-79HD triax adaptor, ensuring full resolution transmission of HDTV signals over conventional triax cable, up to 1550m with 14.5mm diameter Fujikura triax cable. By using optional Up/Down converters HDTV and SDTV formats are supported simultaneously in both digital and analog form with a wide range of built-in interfaces. The CCU-890T also features embedded audio in the SDI output signals, as well as, frame synchronizer for return video input signals. Also CCU-970/M (Fiber) and BS-89A/BS-97 (Harl Rack Fiber CCU) are available; Full rack size CCU-970/M (Fiber type) Half rack size BS-89A/BS-97 (Fiber type)
• TA-79HD HDTV-Triax Camera Adaptor
  A high performance HDTV triax transmission system is now available. This is ideally suited for studio/field applications where there is an existing triax infrastructure.
• Cutting-edge, Network based Control Panel System
  The OCP-200 / MCP-200 is a new Network based control panel system offered as an alternate to the traditional Ikegami style control panels. The Network system allows any OCP-200 to control any camera with assignment set at the OCP itself. System wiring is simplified with control of up to 96 cameras via a single coax cable between CCU locations and video control locations. The OCP-200 and MCP-200 include touch screen LCDs. Conventional one by one camera control connection is also available. more; OCP-200 / MCP-200