Wheatstone D10 Digital Mixer-24 Fader Control Surface- USED

$8,650.00

Included along with the mixing board:

  • 2 PSR Rackmount Power Supplies which are Model SPS-400
  • 1 Power supply will come with 2 cables that power up the console
  • 1 Power supply will come with 2 cables that power up the Bridge Router

Bridge Router boards:

  • 1 Analog Input (ADI-2001D)
  • 1 Analog Output (AO-2001E)
  • 2 AES Input Boards (AES-2024D)
  • 1 Logic I/O (LIO-2001D)
  • 6 Digital Delay (DSP-2001F)
  • 2 CPU Boards
  • 1 QAT-2001 Quad Network

1st Serial Router Cage boards:

  • 3 MI-2001A
  • 2 AO-2001 E Analog Output
  • 1 QAT-2001C Quad Network
  • 2 good working power supplies

2nd Serial Router Cage boards:

  • 4 MI-2001A
  • 2 AO-2001E
  • 1 QAT-2001C
  • 2 good working power supplies

**We Do Not Have Any Cables for the rear of the bridge or satellite routers,  and no cat 5 cables

Description

The Wheatstone D-10 Digital Television Audio Control Surface is fully loaded with all the functions and control capability needed by most television broadcast facilities: 5.1 digital surround, a host of mix-minus clean feed outputs, individual channel bus-minus outputs, 6- band digital equalization, digital dynamic processing, and integrated routing that can access literally thousands of sources and feed thousands of destinations. In addition it can be ordered with paging, allowing you to get 40 channels worth of mixing in a 20 channel footprint. The D-10 gives your operators the added convenience of eight stereo subgroups, four stereo auxiliary busses, four additional DCM/MUTE busses, and a full event/memory front panel storage and recall system that doesn’t require an external computer to operate. And because it’s a live television console, it has extensive communication capability. If there is a mix, you can talk to it. It even has programmable talkback buttons.

Designed to integrate flawlessly with the Wheatstone BRIDGE digital audio network router, the D-10 control surface allows you to easily create large or small platform-based systems that are exceptionally user-friendly and flexible. Wheatstone BRIDGE network cages house all I/O ports and engine cards, and may be wired in tandem within a single equipment room or interconnected to separate remote locations by means of fiber-optic or CAT-5 cables to provide single wire studio integration schemes.

Once configurated, the system operates entirely independently of external computers. Configuration itself is intuitive and carried out onsite by means of user-friendly graphic interfaces provided by Wheatstone desktop software. The D-10 system also takes full advantage of Wheatstone’s exclusive VDip configuration software, so that studio functions (like mutes, fader and timer starts, tally, etc.) are easily accomplished right at your desktop. Once completed, all settings are retained in non-volatile storage, allowing the entire system to run independently. Ethernet protocol is built in, providing interface with automation,

scheduling, and hardware controllers as you require.