RED DSMC2® V-Lock I/O Expander- NEW

  March 27, 2019  |    Leave a comment

red DSMC2 V-LOCK I/O EXPANDER
Free Shipping!
DSMC2 V-LOCK I/O EXPANDER

$1,900.00

RED DSMC2® V-Lock I/O Expander

Product Code- 720-0045

Add to Quote
SKU: 14347 Categories: , , , Tag:

Description

The DSMC2® V-Lock I/O Expander offers a variety of Input/Output connections, as well as an industry standard V-Lock mount to power your DSMC2 camera using RED BRICK® batteries. Constructed from lightweight and durable magnesium, this expander module mounts directly to the rear of the camera BRAIN® and offers connections for the following:

• DC Power input (DC-IN)

• HDMI 1.2 output (Type A socket)

• 3G-SDI output (HD-SDI, 75 Ω BNC)

• CTRL & SYNC ports (2x 00B 4-Pin, Timecode and Genlock support)

• AUX Power output (P-Tap 2-Pin female)

• USB Power output (Type A, 5 V at 1.5 A for powering HDMI transmitters or small mobile devices)

• Stereo Headphone output (3.5 mm jack)

• Stereo Analog input (3.5 mm jack)

 

The DSMC2 V-Lock I/O Expander also features a selector switch that enables the BRAIN to automatically boot when power is provided via the DC-IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.

 

This expander is an ideal solution for a wide variety of production environments—from low-profile run-and-gun situations to studio shoots that require mobility.

 

NOTE: The DSMC2 Top Handle is NOT fully compatible with the DSMC2 Base I/O V-Lock Expander, as the top handle will interfere with most tall batteries when one is attached to the expander module.

 

NOTE: Only one (1) expander module can be used at a time.

DSMC2 V-Lock I/O Expander
DIMENSIONS Height: 4.57 in. (116.0 mm)
Width: 4.94 in. (125.5 mm)
Depth: 2.25 in. (57.2 mm) (connected to BRAIN)
WEIGHT 1.0 lb (454 g)
MATERIAL Magnesium
BRAIN MOUNTING 4x M4 captive mounting screws
BRAIN CONNECTIONS Power delivery via Rear pogo connector (13-Pin)
Communication via Rear I/O connector (4×40 Pin)
CONNECTORS DC IN (6-Pin 1B socket)
3G-SDI output (75 Ω BNC), 60 Hz max frame rate
HDMI 1.2 output (Type A socket), 60 Hz max frame rate
SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B socket)
CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00B socket)
USB Power output (Type A socket), 1.5A
P-Tap Aux Power output (2-Pin), 3.0A
Stereo Analog Microphone input (3.5mm jack)
Stereo Headphone output (3.5mm jack)
AUTO BOOT ON POWER 2-position slider switch
BATTERY COMPATIBILITY RED BRICK
AUDIO 24-bit, 48 KHz, uncompressed, unbalanced mic level
OPERATING TEMPERATURE 0°C to 40°C (32°F to 104°F)
STORAGE TEMPERATURE –20°C to 50°C (–4°F to 122°F)
OPERATING HUMIDITY 0% to 85%, non-condensing
STORAGE HUMIDITY 0% to 85%, non-condensing
FIRMWARE REQUIREMENT Compatible with all DSMC2 firmware v6.2.17 or later.

Tech specs reflect both current and projected information. Everything is subject to change.

Related products